Checking Your Sprayer

Who Should Check?

The operator should have a clear job responsibility to routinely check their application equipment and either attend to the problem or report to their supervisor. Operators have to adhere to the Code of Practice (CoP) including the duty of care ‘to ensure equipment is calibrated and in good condition’. To comply with the CoP an operator must have the appropriate NPTC qualification for the equipment to be used.

First this requires the foundation module PA1 which tests the theory of pesticide application including legislation, interpretation of a product label, personal safety and contamination, container storage and disposals, record keeping and environmental safety. This is followed with the PA6A for handheld sprayers and PA2A for mounted or trailed boom sprayers with hydraulic nozzles.

To meet the requirements for PA6A the operator must demonstrate competence to check the satisfactory condition of the applicator, prepare it for work, read and interpret the product label, calibrate the applicator and then mix/fill with the correct quantities for the specified area to be treated.

The requirements for PA2A are similar to that for handheld sprayers with the addition of attending to the preparation and safe driving of the ‘prime mover’ together with identification of the sprayer’s controls and components.

It is recommended that training should be recorded and is provided by a qualified instructor such as those accredited by Lantra Awards.

For further information on training go to the Lantra Awards web site www.lantra-awards.co.uk and NPTC at www.nptc.org.uk

What To Check And When?

A wide range of types of spray equipment is needed in amenity areas to accommodate the specific areas of use. All sprayers should be checked on a regular basis; a useful guide is.

At the start or change of a programme

• Beginning of the season
  
  
• Move to a different location
  
  
• Changing product / rate
  
  
• Repair or maintenance to sprayer
  

How/What To Record

Records of actions are important both from the point of accountability and useful routine maintenance. It is recommended that managers/operators prepare and use a simple record of checks to all sprayer equipment. The key components of a check record:

• Equipment identification
  
  
• Date checked
  
  
• Procedure
  
  
• Location e.g. on-site, base
  
  
• Parts required and fitted
  
  
• Name and NPTC certification number